Kirjeldus

Stoppers for coil springs by Bronco that mount to the strut of the ATV for extra stiffness. Can be mounted on the front or rear of most ATVs with wide clearance between spring coils.

When mounting a front plow blade or when mounting a rear sand spreader or hauling a timber trailer, these help increase rigidity.

Installation: The suspension is unloaded by lifting the ATV with a jack. The spacers are pressed into the strut. Lubricants such as CRC 5-56 can be used to make it easier to press the shims in. Read the included installation instructions.

1 kit contains 2 shims and can be used on coil springs with 15mm-20mm distance between the spring turns.

Up to 2 shims/spring is possible. However, the recommendation is one shim/spring leg.